Parkside Performance PMZP 4 A1 Montage-, Bedienungs- Und Sicherheitshinweise Seite 21

Sanding sheets are attached to the sanding pad by means of the hook
and loop fastening.
Before fitting a new sanding sheet, remove any dust and dirt from the
sanding pad.
˜ Instructions for mounting
Following the instructions included with the machine to mount
grinding/buffing tools and brushes.
Make sure to use the tools only with devices that have an appropriate
tool attachment.
After mounting, always do a small test run.
˜ Safety instructions for all types of use
Only use equipment expressly intended for use with this tool set and
recommended by the manufacturer.
The exterior diameter and thickness of the attachment must correspond
to the size requirements of your power tool. Incorrectly measured
attachments cannot be sufficiently shielded or controlled.
All attachments must fit exactly on your power tool's reception spindle.
Attachments that do not fit exactly on your power tool's reception
spindle cause a loss of control.
GB/IE 21