Routine Maintenance - Mova Rle22Ga Benutzerhandbuch

EN
5. Press the button or use the app to start cleaning.
Note:
It is recommended to remove the mop assembly before
cleaning carpets.
Use the app to adjust the water flow as required.
14
6. When the robot finishes a cleaning task and returns to the charging dock,
remove the mop assembly and wash the mop pad in time. To remove the
2-in-1 water tank with dust box, press and hold the release clip, and then
take it out.
Note: When the robot is charging or not in use, it is recommended to remove the
2-in-1 water tank with dust box and mop pad. Pour out all the remaining water
in the water tank, and clean the mop pad to prevent mildew or odors.

Routine Maintenance

To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following
table for routine maintenance.
Part Maintenance Frequency
Mop pad After each use
Filter Once every week
Main brush
Side brush
Charging contacts
Omnidirectional wheel
Once every month
Laser Distance Sensor (LDS)
Return-to-Dock Sensors
Bumper
Charging dock's signaling area
Water tank
Clean it as needed
Dust box
Note: The replacement frequency will depend on your usage of the robot. If an exception occurs due to special circumstances, the parts should be replaced.
Replacement Period
Every 3 to 6 months
Every 6 to 12 months
Every 3 to 6 months
/
EN
15