Mova RLE22GA Benutzerhandbuch Seite 10

Routine Maintenance
EN
Clean the Main Brush
1. Press the brush guard clips upwards to remove the brush guard and lift the
brush out of the robot.
2. Use a proper tool to remove any hair tangled in the brush.
Note: Do not pull out the hair tangled in the main brush excessively.
Otherwise, the brush may be damaged.
16
Clean the Side Brush
Pull out the side brush and use a proper tool to remove any hair tangled in
the brush.
Clean the Omnidirectional Wheel
Note:
· Use a tool such as a small screwdriver to separate the axle and tire of the
omnidirectional wheel.
· Rinse the omnidirectional wheel under the running water and put it back
after drying it completely.
Routine Maintenance
Clean the 2-in-1 Water Tank with Dust Box
1. Press the release clip to remove the 2-in-1 water tank with dust box, and
then empty the water tank.
2. Open the dust box cover and empty the dust box.
3. Remove the filters and tap the HEPA filter gently.
Note: Do not attempt to clean the filters with a brush, a finger or sharp
objects to prevent damage.
4. Rinse the dust box and primary filter with water and air dry them
completely before reinstalling.
Note:
· Do not rinse the parts outside the dust box. If there are any water stains,
please wipe them dry before reinstalling.
· Rinse the dust box and primary filter with clean water only. Do not use any
detergent.
· Use the dust box and primary filter only when they are completely dry.
EN
17