Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Do not exert too much pressure on the juicing
cone
. Exerting too much pressure can block
1 ]
[
the motor . In this case, reduce the pressure
somewhat .
NOTE: Drink fresh citrus juices only . Do not
store the juice in metal containers under any
circumstance .
1 . Open the spout
4 ]
[
2 . Place a collecting vessel, e .g . a glass, under
the spout
.
[
4 ]
3 . Place a halved citrus fruit on the juicing
cone
with the cut surface down .
1 ]
[
4 . Pull the handle
down .
[
5 ]
Due to the automatic stop‑start function, the
motor runs automatically . The squeezed juice
flows through the sieve
pulp and seeds are collected, into the juice
holder
and through the spout
3 ]
[
glass .
5 . Stop the motor by lifting the handle
6 . Once the juicing cone
remove the squeezed halved citrus fruit .
7 . Repeat the process with another halved citrus
fruit, if desired .
8 . Before removing the juice holder
spout
by pushing it upwards .
4 ]
[
˜ Cleaning and care
Do not use abrasive cleaning agents .
Never immerse the base unit
contains electronics, in water . Wipe the
housing with a damp cloth only . To remove
stubborn dirt, use a little washing up liquid .
All removable accessory parts are
suitable for dishwasher (up to 60 °C) .
1 . Unplug the mains plug
2 . Before beginning to clean the product or
putting the removable parts in the dishwasher:
Remove the majority of the seeds and fruit pulp
from the sieve
and dispose of these .
2 ]
[
3 . Then immediately clean the removable parts
with warm water and washing‑up liquid or in
the dishwasher .
20 GB/IE
by pressing it downwards .
, where large fruit
2 ]
[
into the
[
4 ]
.
[
5 ]
stops rotating,
1 ]
[
: Close the
3 ]
[
, which
9 ]
[
after use .
[
12 ]
4 . Carefully dry all parts before re‑assembling the
product and putting it away .
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities .
Observe the marking of the packaging
materials for waste separation, which are
marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite materials .
Product:
The product and packaging materials are
recyclable and are subject to extended producer
responsibility .
Dispose them separately, following the illustrated
Info‑tri (sorting information), for better waste
treatment .
The Triman logo is valid in France only .
Contact your local refuse disposal
authority for more details of how to
dispose of your worn‑out product .
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste . Information
on collection points and their opening
hours can be obtained from your local
authority .
˜ Warranty
The product has been manufactured to strict quality
guidelines and meticulously examined before
delivery . In the event of material or manufacturing
defects you have legal rights against the retailer of
Werbung
