1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new device brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for dam-
age to the device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Note:
The operating manual is part of this product. It includes
important instructions for the safe, proper and econom-
ic operation of the product, for avoiding danger, for min-
imising repair costs and downtimes and for increasing
the reliability and extending the service life of the prod-
uct. In addition to the safety instructions in this operat-
ing manual, you must also observe the regulations ap-
plicable to the operation of the product in your country.
Familiarise yourself with all operating and safety instruc-
tions before using the product. Only operate the product as
described and for the specified areas of application. Keep
the operating manual in a good place and hand over all
documents when passing the product on to third parties.
2. Device description
1.
Transport handle
2.
Display
3.
+ button (press to increase)
4.
Unit button
5.
- button (press to decrease)
6.
ON/OFF switch
7.
Ball needle
8.
Conical adapter (swimming accessories)
9.
Adapter for tyre valves
20 | GB
10. Adapter storage compartment
11. AC/DC selector switch
12. Mains cable storage compartment
13. Mains cable
14. Compressed air hose with valve adapter
15. 12V connection socket
16. Compressed air hose / connection cable storage
compartment
3. Scope of delivery
• Compressor
• Ball needle (2x)
• Conical adapter (swimming accessories)
• Adapter for tyre valves
• Operating manual
4. Proper use
This device is suitable for inflating car, motorcycle and
bicycle tyres, sports balls, beach balls, air mattresses
and similar objects.
The device can be used with the power cord when
plugged into the mains, or by connecting it to a 12V
socket (cigarette lighter in a car).
This device is not suitable for tyres with a very large
volume, such as lorry and tractor tyres.
The compressor may only be operated in a dry and
well ventilated indoor space.
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
Please note that our equipment was not designed with the
intention of use for commercial or industrial purposes. We
assume no guarantee if the device is used in commercial
or industrial applications, or for equivalent work.
5. Safety instructions
General power tool safety warnings
m WARNING! Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or se-
rious injury.
www.scheppach.com