Bergstrom COMPACT 1.4 Montageanweisungen Seite 18

COMPACT 1.4
EN
Position the unit on the hatch gap, introducing
5
the guides in the boreholes (*) of the cabin.
5
Introduce the mounts on M8 studs,
6
underneath the upholstery, secure with (4) Ø8
flat washers and (4) 8/125 self-locking nuts,
positioning them in the grooves of the mounts
and tightening until they come up against the
base hexagons.
Caution: It is very important to remove the
hatch wiring clamps to ensure the wiring is
not crushed by the mounts.
6
5
5
6
18