Acoustic Signals - Electrolux GA60GLVSCN Benutzerinformation

10 www.electrolux.com
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
– The levels of rinse aid are from
– Level 0 = no rinse aid is
3. Press
the setting.
4. Press the on/off button to confirm the
setting.
6.4 Use of rinse aid and multi-
tablets
The factory setting of the rinse aid
dispenser is with the dispenser activated.
This means that the rinse aid dispenser
always releases rinse aid.
It is possible to deactivate the rinse aid
dispenser, in this case the dispenser will
not release rinse aid only if the option
Multitab is activated.
If the dispenser is deactivated and you do
not select the option Multitab, the
dispenser will release rinse aid.
The use of the option Multitab with the
rinse aid dispenser deactivated may not
give satisfying drying results.
When the rinse aid dispenser is
deactivated, the rinse aid indicator is
always off when the option Multitab is
activated.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
go off.
, ,
continues to
= level 4.
0A to 6A.
released.
again and again to change
and
, , ,
.
, ,
and • The indicator
• The display shows the current
3. Press
= the rinse aid dispenser is
deactivated.
4. Press the on/off button to confirm the
setting.
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
save
You can also set applicable options
together with the programme.
2. Press and hold
indicator comes on with fixed light.
How to set the MyFavourite
programme
Press
• The indicators that are related to
• The display shows the number and

6.6 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
until
sounds when the programme is
and
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
and
continues to flash.
setting: = the rinse aid
dispenser is activated (factory
setting).
to change the setting.
until the related
.
the MyFavourite programme and
options come on.
the duration of the programme.