Options - Electrolux GA60GLVSCN Benutzerinformation

How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and
hold simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting:
3. Press
= Acoustic signal on.
4. Press the on/off button to confirm the
setting.
6.7 How to set the colour of the
TimeBeam
The appliance must be in programme
selection mode.

7. OPTIONS

Desired options must be
activated every time before
you start a programme
(except for Multitab).
It is not possible to activate or
deactivate options while a
programme is running.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt.
The salt indicator does not come on.
This option also deactivates the release of
rinse aid but only when the rinse aid
dispenser is deactivated, (rinse aid
indicator does not come on). If the rinse
aid dispenser is activated, rinse aid is
and
, , ,
, ,
continues to
= Acoustic signal off.
to change the setting.
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
1. To enter the user mode, press and
hold simultaneously
until
the indicators
and
start to flash and the display is blank.
2. Press
• The indicators
and
• The indicator
• The display shows a number and
3. Press
the colour.
• You can see the different colours
4. Press the on/off button to confirm the
setting.
released even with the option Multitab
activated.
With the use of this option the programme
duration is prolonged to increase the
cleaning and drying results with the use of
multi-tablets.
You do not need to activate the option
Multitab every time you start a
programme. Once you have activated the
option it will remain active.
How to activate Multitab
Press
The related indicator comes on.
7.2 TimeSaver
This option increases the pressure and the
temperature of the water. The washing
and the drying phases are shorter.
, ,
.
,
go off.
continues to flash.
the letter C. Each number refers to
a different colour.
– = TimeBeam deactivated.
again and again to change
on the kitchen floor.
.
ENGLISH 11
and until
, and
, and