EN
I T
Problem encountered
The machine will not switch on after
the button
is pressed.
Excessive heating time perceived
(i.e. more than 40 seconds).
TROUBLESHOOTING
Possible causes
» Machine is not connected to the
power source.
» The machine is connect to power
strip not working.
» Power supply not available in the
electric/household mains.
» Touch interface fails to respond.
» Wrong simultaneous pressure of 2
buttons.
» Machine storage at low temperatures
(e.g.: cellar/garage).
88
Solution
» Connected the machine to the power
source.
» Connected the machine directly to
the power source.
» Connect another device to check the
power supply.
» Verify that the interface surface and
the user's hands are clean and dry.
» Wait a few seconds, then press the
button
only.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.
» Keep the machine in a suitable place
over at least 1 hour.
Then, plug the machine into the
mains socket and try to switch it on.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.