EN
I T
Empty the container used to collect the solution.
button, LONG COFFEE
The
water" warning lamp
Descaling warning lamp
Remove the water tank, rinse and wash it accurately.
Fill it with drinking fresh non-carbonated water up to the
MAX. level.
In case of power supply interruption, the machine will,
upon the first power-on, resume the rinse procedure
where it was interrupted: press the LONG COFFEE
button
to restart RINSING.
MAINTENANCE AND CLEANING
button and "No
will be ON to a steady light.
will be ON and blinking.
Fit the tank back into place on the machine.
Place a container with a capacity of at least 16.9 fl oz (0.5 L)
under the supplying device.
Press the LONG COFFEE button
ing cycle.
To end the rinse cycle, a minimum amount of water of
33.81 fl oz (1 litre) (approximately 1 full tank)
to be supplied.
In case of lack of water, the cycle will be temporarily inter-
rupted, the machine will emit a prolonged acoustic signal
(if enabled) and the "No water" warning lamp
come on to a steady light.
Top up the tank and press the LONG COFFEE button
again to restart the rinse cycle.
At rinse end, the descaling warning lamp goes off, which
confirms that the procedure has come to an end.
Before using the machine, empty and thoroughly rinse
the milk frothing jug and its cover, clean it using a soft
moist cloth.
84
to start he rins-
will have
will