EN
I T
Problem encountered
ON/STANDBY button
light with acoustic signal
when preparing a milk-based beverage.
Contact Lavazza Customer Service for any problem or failure not included in the above list.
• Power supply: 220-240V / 50-60Hz
• Nominal power : 1500W
• Dimensions:
Height
280 mm 145 mm 380 mm
11.02 in
TROUBLESHOOTING
» Milk frothing beater not correctly
red warning
installed.
emitted
» Beater cover components not
installed in their correct positions .
» Use of soluble products.
» Dirt.
TECHNICAL SPECIFICATIONS
Width
Depth
5.70 in
14.96 in
Possible causes
• Weight: 4,5 kg (8,81 lb)
• Water tank removable type: 1,1 L (38,71 oz)
• Housing materials: Thermoplastic
• Cable Length: 0,8 m (31.49 in)
96
Solution
» Position the milk frothing beater
correctly as shown in the Manual
(page 77).
» Make sure that the beater shaft
retainer is correctly positioned
(see page 77).
» Do not use powder soluble products
(such as CHOCOLATE).
» Clean all of the beater cover outer
parts.
IF THE PROBLEM REMAIN
PLEASE CONTACT LAVAZZA
CUSTOMER SERVICE.