Appliance Operation - Royal Catering Rcsi-16 Bedienungsanleitung

a) Press and hold the required key for 5 seconds: the "SUB" key to reduce the ice
cream batch thickness or the "ADD" key to increase the thickness. The
appliance control system enters the setting mode.
b) The LCD display will cycle through the parameters.
c) Operate either of the both keys to reduce/increase the ice cream bulk
thickness (d / e).
d) The setting is changed in 0.1 increments. The thickness can be adjusted to
anywhere within 2.0 and 6.0.
e) Having input the thickness setting, wait for the appliance to store it in memory
and show the main readings on the LCD.
3.3.5. PRE-COOLING TEMPERATURE SETTINGS
a) CAUTION! The pre-cooling mode is supported in model RCSI-17/ RCSI-18.
There are two temperature thresholds selectable for the refrigerating system.
First, the low temperature threshold is configured, followed by the high
temperature threshold.
b) CAUTION! When the appliance reaches the low temperature threshold while
running, the refrigerating system will stop.
c) CAUTION! When the appliance reaches the high temperature threshold, the
refrigerating system will restart.
d) Start the pre-cooling. Do this by pressing and holding the batch pre-cooling /
cooling level selector key (g) for approx. 5 seconds.
e) The control system enters the low temperature threshold setting mode. The
setting can be adjusted to anywhere within 0-10°C.
f) The LCD reads the current setting of the pre-cooling low temperature
threshold.
g) Change the temperature setting by operating the "SUB" or "ADD" keys (d / e).
h) CAUTION! The user can enter the setting in 1°C increments.
i) Having input the setting, wait for the appliance to store it in memory and show
the main readings on the LCD.
j) Do this by pressing and holding the batch pre-cooling / cooling level selector
key (g) for approx. 5 seconds.
k) The control system enters the high temperature threshold setting mode. The
setting can be adjusted to anywhere within 12-25°C.
l) Enter the setting by repeating step (e) in this section.
3.3.6. RESETTING THE DISPENSED ICE CREAM CONE COUNTER
a) CAUTION! Resetting the counter too often may cause the electrical circuitry of
the appliance to fail.
b) To display the dispensed ice cream counter reading, press and hold the "SUB"
and "ADD" buttons (d / e) simultaneously for approx. 5 seconds.
c) Now, press and hold the "SUB" (d) or "ADD" (e) key for 5 seconds. The counter
is reset to zero.
3.3.7.

APPLIANCE OPERATION

EN