Installing The Appliance - Royal Catering Rcsi-16 Bedienungsanleitung

INSTALLING THE APPLIANCE

A – Model RCSI-16/ RCSI-17
B – Model RCSI-18
C – Apply the lubricant here
6 – Refrigerating compartment
7 – Stirrer
8 – Refrigerating compartment guard
gasket
9 – Refrigerating compartment guard
10 – Valve stem
11 – Valve stem o-rings
a) Install the stirrer (7) inside the refrigerating compartment (6).
b) Seat the refrigerating compartment guard gasket (8) inside the compartment
guard (9).
c) Slide the dedicated o-rings (17 – size 11x2) onto the valve stem (10).
d) CAUTION! For model RCSI-18: Slide the dedicated gasket (18) onto the mid stem
of the valve.
e) Align the resulting assembly with the opening in the opening of the refrigerating
compartment guard (9) and install the assembly in the opening.
f) Install the dispenser levers (12) by inserting them into the holes in the valve
stems (10). Secure the assembly using the cotter pin (13).
g) CAUTION! For model RCSI-16/ RCSI-17: Install the dispenser gasket (15). Do this
by removing the dispenser lid (16) turning it clockwise to detach. Install the
gasket (15) inside of the detached part. Reinstall the detached parts.
EN
12 – Lever
13 – Cotter pin
14 – Fasteners
15 – Dispenser gasket
16 – Dispenser lid
17 – Stem o-ring, mid size
18 – Mid stem gasket (model RCSI-
18)