Intended Use; Safety Information - Scheppach 7906102705 Originalbetriebsanleitung

m WARNING!
The product and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!

4. Intended use

This air-powered drill is suitable for drilling into plastic,
wood, metal and similar materials. Only use the product
as described and for the indicated purpose. Keep these
instructions in a safe place. When passing this product
on to others, please also include all the documents. Any
use other than the intended is prohibited and potential-
ly dangerous. Damages resulting from noncompliance
or misuse are not covered by the warranty and are not
included in the manufacturer's liability. This device has
been designed for household use and may not be used
for commercial or industrial purposes.

5. Safety information

Safety instructions for compressed air tools
WARNING! Basic safety measures must be followed
when using air tools to eliminate the risk of fire, electric
shock and personal injury. Please be sure to read and
follow the notices in this operating manual prior to the first
use and store them in a safe place.
The manufacturer assumes no liability for damages or
personal injury resulting from failure to follow these op-
erating instructions.
The hazards listed are foreseeable for general use of
handheld air impact drivers. However, the user must
also assess specific risks which may arise from its use.
• DANGER! or damages or personal injury resulting
from failure to follow these operating instructions.
• WARNING! RISK OF INJURY! Disconnect the com-
pressed air before changing tools, adjustments and
maintenance.
• WARNING! Risk of explosion! Never use petrol or
other flammable liquids to clean the air tool! Sparks
could ignite residual vapours inside the compressed
air tool resulting in explosion. Do not use the tool in
explosive environments with flammable liquids, gas-
ses or dust. Never work on materials which are or
potentially could be highly flammable or explosive.
20 | GB
• In the cases of multiple hazards the safety instruc-
tions must be read and understood before attaching,
operating, repairing and exchanging accessories
and before working near the drill. Otherwise severe
bodily injuries may result.
• The drill should only be set up, adjusted or used by
qualified and trained operators.
• Never modify the drill. Modifications may reduce the
effectiveness of safety measures and increase op-
erator risks.
• Do not lose the safety instructions – hand them to
the operator.
• Never use a damaged machine on screw connections.
• Regularly maintain machines to verify all required
rated values and markings such as rated speed or
rated air pressure are legible on the machine. If nec-
essary, the user must contact the manufacturer for
replacement labels for markings.
• Only use the equipment for applications for which it
was designed!
• Do not overburden the device.
• Never use hydrogen, oxygen, carbon dioxide or oth-
er bottled gasses to power this tool as doing so may
result in explosion, thus severe injuries.
• Regularly maintain and clean the device as required
(see chapters „Maintenance" and Cleaning and care").
• Check the device for damage prior to initial opera-
tion. Always verify the tool's proper condition before
every use.
• Remain alert at all times! Unforeseen machine
movement due to reaction forces or the tool or coun-
ter bearing breaking may result in injuries.
• Unforeseen tool movements may result in hazard-
ous situations.
• Crushing risk based on the torque between the
counter bearing and the work piece.
• Keep hands away from the tool being used to pre-
vent the risk of injuries.
• Only use holders and adapters in good condition and
intended for use with the machines described here.
• Avoid an unnatural posture. Always maintain a proper
footing and balance. This will allow you to better control
the electrical power tool in unforeseen circumstances.
• Switch the device off when not in use.
• Always wear personal protective equipment and
safety glasses. Wearing personal protective equip-
ment such as dust mask, non-slip safety shoes, hard
hat or ear protectors, depending on the type of air
tool and its application, reduces the risk of injuries.
www.scheppach.com