Setting Of The Temperature - Pkm GT 320 A++ M Bedienungsanleitung

1. Press the
KEY LOCK BUTTON
2. The key lock will be disabled and the operating buttons
are released again.
If the
KEY LOCK
carried out.

4.5 Setting of the temperature

 The settings of the temperature of the freezer can be adjusted manually by
pressing the relevant buttons (C / D to increase or decrease the temperature in
the freezer) until the desired values will be indicated (s. chapter 4.3 C
/ O
PANEL PERATING BUTTONS
 When you set a temperature, you set an average temperature for the whole
freezer. Temperatures inside each area of the freezer may vary from the
temperature values indicated on the display, depending on how much food you
store and where you place them. Ambient temperature may also affect the actual
temperature inside the appliance.
To perform the following settings the display must be unlocked.
 The temperature of the freezer can be indicated in
(degree Fahrenheit).
 The temperature units (
 Press the F
AST
the
INCREASE OF THE TEMPERATURE
 According to the pre-set temperature unit the display
0
indicates C or
Unlock of the key lock:
(A) for 3 seconds.
is activated, none of the following settings below can be
/
Selection of the temperature unit
0 0
C and F) can be changed as follows:
F
REEZING BUTTON
0
F.
).
DISPLAY
(B) and the button for
(C) simultaneously.
51
0
C (degree Celsius) or in
ONTROL
0
F