Pkm GT 320 A++ M Bedienungsanleitung Seite 60

1. The appliance has been switched off
for a while.
2. Too much or too hot food in the
appliance.
3. The door of the appliance is opened
too often or too long.
1. The door is not properly closed.
2. The door seal is damaged or soiled.
The door makes a strange sound when opened.
1. The door seals are soiled.
1. The appliance is not installed on a
flat and level ground.. The appliance
touches a wall or another object.
2. Frozen food is stored improperly.
3. Items have dropped behind the
appliance
1. The water outlet is not closed
properly.
1. The LED light (depending on
model) may be damaged.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
NOTICE! In case of a power failure the current settings will be secured
and maintained until the appliance is supplied with power again (max.
storage time / malfunction: s. chapter T
The operating conditions described below are normal
 The refrigerant generates a sound similar to flowing water.
 Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
 The sides of the appliance may get warm while the appliance is running.
The compressor operates for too long.
Formation of encrusted ice.
Uncommon noise.
Water drips on the floor.
The light is not working.
and do not indicate a malfunction.
1. The appliance needs some time to
reach the preset temperature.
2. Remove any hot food.
3. Do not open the door too often/too
long.
1. Close the door properly.
2. Clean and / or replace the door seal.
1. Clean the door seals.
1. Install the appliance properly.
2. Store food properly.
3. Remove the items.
1. Close the water outlet properly.
1. Refer to replace LED lights in
cleaning and care chapter.
ECHNICAL DATA
60
).