A
Key lock O
Button for the activation of the F
B
F
REEZING
C
Button to increase the temperature
D
Button to decrease the temperature
E
Indicator: H
F
Indicator of the active operation of the F
Digital display: Indicator of the
G
ERROR CODES
If you connect the appliance to the mains, the control panel reaches complete
indication after 3 seconds. An acoustic signal sounds and the control panel
indicates normal operation.
During normal operation the control panel / display indicates the set
temperature or the set mode of the freezer.
In case of a malfunction of the category -visible error code- the display indicates
the respective error code (s. chapter 6.1 E
If you do not press any operating button within 30 seconds after activation of
the key lock and the door is closed, the display goes off (s. chapter 4.4 K
).
LOCK
4.4 Key lock
1. Press the
KEY LOCK BUTTON
2. The
KEY LOCK
locked.
After 30 seconds without using any operation buttons,
the display goes off.
If you press any operating button within 30 seconds, the
display indicates normal operation.
In case of a malfunction of the category -visible error
code- the display indicates the respective error code and
goes off after 30 seconds.
/ O
N
FF
IGH TEMPERATURE ALARM
in case of malfunction
Control panel and display:
(A) for 3 seconds.
is activated and the operating buttons are
F
AST
REEZING MODE
F
AST
REEZING MODE
SET TEMPERATURE
).
RROR CODES
50
/ F
AST
/ Indicator of the
EY