Displaying General Device Information; Displaying The Logging Status; Displaying The Connection Status; Displaying Remote Access Over Internet - Resol Mx Plus Handbuch

3.3

Displaying general device information

In order to display general device information, proceed as follows:
Î Click the Status main menu.
The following information is displayed in Status:
• Name
• Date and time
• Device uptime
• Serial number
• Firmware version
• Support report
3.4

Displaying the logging status

In order to display the logging status, proceed as follows:
Î Click the Status main menu.
The following information is displayed in Logging:
• Capacity in total
• Capacity used
• Remaining time
3.5

Displaying the connection status

In order to display the connection status, proceed as follows:
Î Click the Status main menu.
The following information is displayed in Connection:
• Local network accessible
• Internet accessible
• Web portal access enabled
• Web portal accessible
3.6

Displaying remote access over Internet

In order to display the status of the remote access over Internet, proceed as
follows:
Î Click the Status main menu.
The following information is displayed in Remote access over Internet:
• User e-mail address or Token
24
3.7 Displaying network configuration information
In order to display the network configuration, proceed as follows:
Î Click the Status main menu.
The following information is displayed in LAN:
• IP address
• MAC address
3.8

Displaying WLAN connection information

In order to display the WLAN connection information, proceed as follows:
Î Click the Status main menu.
The following information is displayed in WLAN:
• Network name (SSID)
• Signal strength (for more information on signal strength, siehe Kap. 3.24 auf Seite
12)
• Encryption
• Channel
• IP address
• MAC address
3.9

Displaying access point information

In order to display access point information, proceed as follows:
Î Click the Status main menu.
The following information is displayed in Access point:
• Network name (SSID)
• Encryption
• MAC address
• Channel
• IP address

3.10 Changing the Web interface language

The Web interface can be displayed in different languages.
Î Click the flag to select the language.
• Deutsch
• English
• French
• Spanish
• Italian
The language is then changed for this session.