3
Web interface
The Web interface is integrated in the device and runs on an Internet browser.
The Web interface has the following functions:
• Display device status
• Configure device
Note
If display problems occur, update the Internet browser or use a different
browser.
3.1
Menu
All main menus and the Login menu item are displayed in the bar at the top of
the Web interface.
Note
The menu structure may change in later firmware versions.
Note
The indicated information and setting possibilities depend on the user
mode selected, siehe Kap. 3.17 auf Seite 10.
In order to use the Web interface to its full extent, a login is required. In order to
log in, proceed as follows:
1. Click Login on the menu bar.
The Login window appears. The password can be found on the last page of this
manual and is also displayed on then controller.
2. Enter the password into the Password field.
3. Click the Login button.
3.2
Menu overview
Main menu
Submenu
Home
-
Status
Status
Configuration
General
Date and time
Logging
Network
Remote access
Users
Modbus
BACnet
Parameterization
Data
Live
Filters
Download
Erase
About
General
Powered by
History
Login/Logout
-
Function
-
Displaying general device information
Displaying the logging status
Displaying the connection status
Displaying remote access over Internet
Displaying LAN / WLAN information
Displaying access point information
Changing general configuration
Carrying out a firmware update
Changing date and time configuration
Adjusting logging interval and type
Changing LAN configuration
Changing WLAN settings
Changing WLAN STA settings
Changing access point settings
Bus access over local network
Configuring remote access over Internet
Changing the password
Setting up Modbus
Setting up BACnet
Parameterising the controller
Displaying current controller data in form of
a table
Configuring filters for data download
Exporting data
Erasing data stored
Order MX Plus open source software
Display the open source applications and
libraries used
Display firmware updates
Log in or log out
23