Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Regulations - Zibro P 720 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für P 720:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
A

SAFETY REGULATIONS

Before connecting the device, check that:
Have the electrical installation checked by a recognised expert if you are not sure
that everything is in order.
4
74
IMPORTANT
• The installation must be completely in accordance with local
regulations, ordinances and standards.
• The device is suitable exclusively for use in dry places, indoors.
• Check the mains voltage. This device is suitable exclusively for
earthed sockets – connection voltage 220-240 Volt/ 50 Hz.
• The device MUST always have an earthed connection. You may
absolutely not connect the device if the power supply is not earthed.
• The plug must always be easily accessible when the device is
connected.
• Read these instructions carefully and follow the directions.
The connection voltage corresponds to that on the type plate.
The socket and power supply are suitable for the device.
The plug on the cable fits the socke.t
The device is on a stable and flat surface.
The airconditioner is a safe device, manufactured in accordance with CE
safety standards. Nevertheless, as with every electrical device, exercise
caution when using it.
Never cover the air inlets and outlets.
Empty the water reservoir through the water drain ¸ before moving it.
Never allow the device to come into contact with chemicals.
Do not insert objects into the openings of the device.
Never allow the device to come into contact with water. Do not spray the
device with water or submerge it as this may cause a short circuit.
Always take the plug out of the socket before cleaning or replacing the
device or a part of the device.
NEVER connect the device with the aid of an extension cable. If a suitable,
earthed socket is not available, have one fitted by a recognised electrician.
Always consider the safety of children in the vicinity of this device, as with
every electrical device.
Always have any repairs – beyond regular maintenance – carried out by a
recognised service engineer. Failure to do so may lead to invalidation of the
guarantee.
Always take the plug out of the socket when the device is not in use.
A damaged electricity cable may only be replaced by the supplier or n
authorised person/service point.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

P 729P 726Ph 733

Inhaltsverzeichnis