Pkm F7-2S Bedienungsanleitung Seite 190

Vorschau ausblenden Andere Handbücher für F7-2S:

1. Switch on the appliance using the « O

2. The appliance is now in

3. Set the desired cleaning programme using the « P

the corresponding buttons to set the desired additional programme functions.

Always observe the instructions in chapter 6.2 S

4. Press the « H

function « H

5. The operational status indicator of this function goes on.

6. The programme function « H

If the selected cleaning programme cannot be combined with the desired

programme function(s), these functions cannot be selected or will be cancelled

and the indicators switches off automatically.

6.3 How to change a running cleaning programme

WARNING! While the appliance is operating it is dangerous to open

its door as hot water may spurt out. RISK OF SCALDING! RISK OF

You can only change a cleaning programme when it has run a short period

of time. Otherwise, the detergent has dissolved and the dishwater has

been drained. In such a case you must refill the detergent container.

1. Open the door slightly to interrupt the running programme.

2. You can open the door completely after the rotating spray arms have stopped

3. Press and hold the « P

appliance is now in

4. Set the new cleaning programme using the « P

5. The programme indicator of the previously set cleaning programme goes off and

the programme indicator of the newly set cleaning programme goes on.

6. Close the door of the dishwasher properly.

7. The cleaning programme will start after approx. 10 seconds automatically.

OW TO ACTIVATE THE PROGRAMME FUNCTION

STANDBY MODE

» for the set cleaning programme.

STANDBY MODE

») once to activate the programme

» is activated.

for more than 3 seconds. The

TARTING OF A CLEANING