Pkm F7-2S Bedienungsanleitung Seite 180

5. You can now push the dish rack back into the appliance. The upper dish rack is
in the high position (s. fig. below).
1. Repeat steps 1 - 3 as described above under « H
».
RACK
2. Replace the upper dish rack (A), positioning the guide rails (B) between the upper
(C) and middle wheel sets (D); as shown in the figure below. The dish rack is now
back in the low position.
A
B
C
D
H
OW TO LOWER THE UPPER DISH RACK
G
UIDE RAIL
U
PPER WHEEL SET
M
IDDLE WHEEL SET
~
OW TO LIFT THE UPPER DISH
U
PPER DISH RACK
(on both sides)
(on both sides)
(on both sides)
~
129