Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12.2.6 Replacement of the V-belt
The V-belt may only be removed and replaced by our
customer service.
13. Transport
m Due to the heavy weight of the machine, we rec-
ommend transport by at least two people.
m WARNING!
Danger of injury!
Unintended and unexpected start-up of the product
may lead to injuries.
• After loading, switch off the engine and, after the en-
gine has cooled down, remove the spark plug con-
nector from the spark plug.
• The product can cause severe crushing injuries due
to its own weight. Allow the engine to cool down be-
fore transporting or loading to avoid burns and to
prevent fire hazards.
m The product can fall and cause damage or injury if it
is not loaded properly.
When transporting over longer distances, drain the fuel
tank completely. Secure the product on the transport
vehicle against rolling, slipping or tipping over and also
lash down the product.
Hold the upper push bar (2) with both hands and tilt
the product backwards to transport the petrol sweeper.
14. Storage
If the product will not be used for a longer period of time
(more than 30 days), follow the steps below for storage:
14.1 Drain fuel with a petrol extraction pump
In case of storage over a longer period of time, the fuel
must be drained.
m WARNING!
Health hazard!
Inhalation of fuel / lubricating oil vapours and exhaust
gases can cause serious damage to health, uncon-
sciousness and in extreme cases death.
• Do not breathe fuel / lubricating oil vapours and ex-
haust gases.
• Empty out fuel only outdoors.
38 | GB
1.
Hold a collection bucket under the hose of the pet-
rol extraction pump (not included in the scope of
delivery).
2.
Unscrew and remove the fuel filler cap (10).
3.
Push the hose of the petrol extraction pump into
the fuel tank and drain out the fuel completely us-
ing the petrol extraction pump.
4.
Retighten the fuel filler cap (10).
15. Repair & ordering spare parts
After repairs or maintenance, make sure that all safe-
ty-related parts are installed and are in perfect con-
dition. All parts which may cause injury must be kept
where they are inaccessible to children or others.
Attention: According to the German Product Liability
Act, no liability is accepted for damage caused by im-
proper repairs or by not using original spare parts.
Such work should be performed by a customer service
centre or an authorised specialist. The same applies to
accessory parts.
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
Connections and repairs
Connections and repair work on the electrical equip-
ment may only be carried out by electricians.
Please provide the following information in the event
of any queries:
• Machine data - type plate
• Motor data - type plate
Important note in the case of repairs:
For return delivery of the product for repair, please en-
sure for safety reasons that it is free of oil and fuel when
it is sent to the service centre.
15.1 Ordering spare parts
Please provide the following information when order-
ing spare parts:
• Model designation
• Item number
• Type plate data
Spare parts / accessories
Snow blade
Collection box
www.scheppach.com
Article no.:
7908700704
7908700705
Werbung
