Table 40: Ferrites For Ethernet Control Head - Motorola MTM800 FuG Installationshandbuch

Table 40: Ferrites for Ethernet Control Head

Accessory
Assembly, Ferrite Beads
1
Keep the GCAI connector cover supplied with the new Control Head.
2
Requires Junction Box, GMLN5089_.
3
The cable, PMKN4104_, is only compatible when a Data Expansion Head Enhanced is not fitted as
part of a remote mount configuration. In this configuration, access to the TETRA PEI for IP Packet
Data and SDS services is available on the Data Expansion Head Enhanced and the Active Data Cable
PMKN4104_ cannot be used.
4
Use both for programming and data purposes.
CAUTION:
Complex installations requiring extended cable runs and Remote Mount Control Heads with
Audio Accessories such as the Telephone Style Handset (HLN7016_) may benefit from careful
routing of cables, and in some cases additional Electro Magnetic Compatibility (EMC) reduction
techniques such as using Ferrite or Toroid accessories. Suitable examples of Ferrite or Toroid
accessories are as follows:
• Ferrite Clamp, Part Number 91012044001, 91012044002, or 91012044003
• Toroid, Part Number 01015001001
Send Feedback
Chapter 2: Model Information and Accessories
Part Number M1
PMLN6488_
68015000553-KC
M2 M3 M4
x
33
M5