Installing Motorcycle Mount Enhanced Control Head; Figure 35: Motorcycle Installation - Motorola MTM800 FuG Installationshandbuch

68015000553-KC
Chapter 4: Radio Installation
4.5.1

Installing Motorcycle Mount Enhanced Control Head

Planning is the key to fast, easy radio installation. Before a hole is drilled or a wire is run, inspect the
vehicle and determine how and where you intend to mount the antenna, radio, and accessories. Plan
wire and cable runs to provide maximum protection from pinching, crushing, and overheating.
NOTICE: Only persons who are competent and able to ensure that the complete installation
fulfils its regulatory requirements, such as ElectroMagnetic Compatibility (EMC) are allowed to
plan the installation.
When and where to use: The following list of considerations should, as a minimum, be checked
during installation planning:

Figure 35: Motorcycle Installation

Number Description
1 Motorcycle Mount Enhanced Control Head
2 Transceiver-to-Control Head Cable (PMKN4030_)
3 Chassis ground (PMKN4029_)
70
1
2
4
3
7
8
5
9
6
Table continued...
10
11
12
Send Feedback