Parkside Performance PPRMA 40-Li B2 Originalbetriebsanleitung Seite 52

˜ PARKSIDE app
NOTE
The PARKSIDE app lets you
u
monitor the product and control
certain functions . The functions
may change with updates to
the app and firmware. For more
information on the PARKSIDE app,
see the instructions for the smart
battery .
The PARKSIDE app supports the
u
operating systems iOS 15.0 and
above or Android 6.0 and above.
˜ Requirements
To find the product in the PARKSIDE
app, the following requirements must
be met:
The PARKSIDE app is installed on
your smartphone and Bluetooth
activated .
The following battery pack is
inside the product: PARKSIDE
Performance Smart battery
PAPS 204 A1 or PAPS 208 A1 .
This smart battery pack has already
been connected to the PARKSIDE
app .
The product communicates with the
PARKSIDE app via the smart battery
pack .
The smart battery pack is connected
to the PARKSIDE app .
˜ Connecting the product to
the PARKSIDE app
1 . Insert the smart battery pack
2 . Press .
[ 20 ]
product is connected,
continuously .
3 . Open the PARKSIDE app . The
product is displayed in the list . If the
product does not appear in the list,
add the product manually .
48 GB/IE
is
®
.
24 ] [
flashes. When the
18 ] [
lights up
˜ Connecting the product
manually
Monitoring and controlling the product
1 . Select the product from the list . The
overview page of the product is
displayed .
2 . Select the desired setting on the
overview page .
Tap to select the help menu if you
are unsure .
A dialogue box with a description for
the relevant setting is displayed .
˜ Cleaning/maintenance
WARNING
m
Have any work that is not
u
described in these operating
instructions performed by an
authorised customer service
centre. Only use original parts.
Wear gloves when handling the
blade .
WARNING! – Disconnect
battery before maintenance .
Switch off the machine, remove the
u
battery and wait for the blade to
24 ] [
come to a stop .
˜ General cleaning and
maintenance work
WARNING
m
Never spray down the device with
u
water. There is a risk of electric
shock.
Always keep the device clean . Use a
brush or cloth for cleaning, but do not
use any cleaning agents or solvents .