WARNING!
m
The vibration emission value
u
whilst actually using the machine
may vary from the given values
depending on the type and way in
which the machine is used .
Safety measures for protection of
u
the operator are to be determined
that are based on an estimate of the
actual vibration load under the real
operating conditions (for this, all
parts of the operating cycle are to
be taken into account, for example,
times in which the machine is
turned off, and those during which
it is turned on but running without
a load) .
Charging time
WARNING! Risk of injury and
m
property damage due to improper
handling of the battery pack!
Observe the safety instructions and
u
notes on charging and proper use
as shown in the user manual for
your battery pack and charger from
the X 20 V TEAM series .
You can find a detailed description
u
of the charging process and further
information in the separate user
manual .
The product is part of the
X 20 V TEAM series and can be
operated with battery packs of the
X 20 V TEAM series . Battery packs
of the X 20 V TEAM series may only
be charged using chargers of the
X 20 V TEAM series .
The charging time is influenced by
factors such as the temperature of
the environment and the battery
pack, as well as the mains voltage
applied, and may therefore deviate
from the specified values.
We recommend that you operate this
product with the following battery
packs only:
PAP 20 B1
–
PAP 20 B3
–
Smart PAPS 204 A1
–
Smart PAPS 208 A1
–
We recommend charging these
battery packs with the following
chargers:
PLG 20 A3
–
PLG 20 A4
–
PLG 20 C1
–
PLG 20 C3
–
PDSLG 20 A1
–
Smart PLGS 2012 A1
–
GB/IE
37