WARNING
m
Do not operate the machine
u
without an impact protection or
grass collection bag. There is a
risk of injury.
Emptying the grass
collection bag
Illustration C:
1 . Remove the grass collection bag
2 . Hold the grass collection bag by the
handle
.
[
13 ]
3 . Tilt the grass collection bag .
4 . Empty the cut grass into a suitable
container .
Setting the cutting height
The machine has 10 positions for
adjusting the cutting height:
25/30/35/40 mm
50/60/70 mm
80/90/100 mm
Illustration D:
1 . Grip the lever for adjusting the cutting
height
and move it past the ratchet
[
11 ]
mechanism to the desired cutting
height .
The correct cutting height is between 25
and 45 mm for an ornamental lawn and
about 45 to 65 mm for a utility lawn.
NOTE
A high cutting height should be
u
selected for the first mowing of the
season .
44 GB/IE
[
12 ]
low cutting height
–
medium cutting
–
height
high cutting height
–
Inserting/removing the
mulching kit
NOTE
Use the mulching kit without the
u
side grass ejector .
Insert mulching kit,
Illustration E:
1 . Remove the collection bag, if
inserted .
.
2 . Lift the impact protection
3 . Insert the mulching kit
it down .
NOTE
The two lugs on the mulching kit
u
must be seated in the two recesses
on the machine housing .
Remove the mulching kit,
Illustration E:
1 . Lift the mulching kit
lift the two lugs out of the recess on
the machine housing .
2 . Remove the mulching kit
Hooking in/removing the
side grass ejector
When using the side ejector chute, the
cut grass falls sideways onto the lawn .
Illustration F:
1 . Remove the grass collection bag
(see "Hooking in/removing the grass
collection bag") .
2 . Insert the mulching kit
"Inserting/removing the mulching
kit") .
NOTE
This will prevent the clippings from
u
accumulating in the ejector chute .
3 . Lift the impact protection on the side
ejector
.
9 ]
[
4 . Hook in the side ejector chute
.
[
7 ]
and press
21 ]
[
at the back to
[
21 ]
.
[
21 ]
12 ]
[
(see
[
21 ]
.
22 ]
[