7 . To switch the machine off, release the
start handle
.
2 ]
[
NOTE
Due to the intelligent energy
u
management, the motor starts up
with a delay (soft start) .
WARNING
m
The blade will keep rotating for
u
a few seconds after the machine
has been switched off. Do not
touch the running blade. There is
a risk of personal injury.
Activating/deactivating the
wheel drive
Activate the wheel drive,
Illustration H:
Push the drive bracket
upper bar
.
1 ]
[
Deactivate the wheel drive,
Illustration H:
Let go of the drive bracket
Setting the speed of the
wheel drive
Illustration H:
You can vary the speed of the wheel
drive using the speed lever
upper bar
.
1 ]
[
High speed
Low speed
Selecting the speed
The speed can be set using the
preselection button
control panel . The currently selected
level lights up on the control panel .
46 GB/IE
Checking the charge level of
Checking the charge level
Checking the charge level, with battery
inserted
towards the
16 ]
[
.
[
16 ]
on the
[
3 ]
3 LEDs illuminated (red, orange and
green):
Battery charged
on the
2 LEDs illuminated (red and orange):
19 ]
[
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged
Level 2 is Auto mode, the machine
starts at 3300 rpm
reduces speed when resistance is
low and increases speed when it
meets resistance .
Level 1 is ECO mode, the machine
runs at 2900 rpm
the batteries
Press the button for the charge level
indicator on the battery
charge level of the battery is indicated
by illumination of the corresponding
LED light on the battery .
The charge level of the battery is
indicated during operation on the
control panel by the illumination
of the corresponding LEDs on the
charge level indicator
If the machine is not in use, press
the charge level indicator button
on the control panel to activate
20 ]
[
the machine and the charge level
indicator
.
[
17 ]
NOTE
If only one pair of battery is
u
inserted, the other battery indication
will be red LED flash on charge level
indicator
.
17 ]
[
, automatically
-1
.
-1
. The
26 ]
[
.
17 ]
[