Werbung
EN
Keep cool function
The ice cream maker features an ice cream keep cool function. To prevent any
inconvenience, we kindly request that you do not leave the ice cream production
process or consume the ice cream immediately after production. Leaving the ice
cream in a warm environment for an extended period can cause it to melt. We
have incorporated a new feature into the machine's design: when the ice cream is
produced but no one is operating it, the machine will activate the cooling function
at regular intervals to maintain the fresh taste and texture of the ice cream. The
insulation time is one hour, and a series of ten short beeps will indicate when the
process is complete. The machine will then automatically power down.
Motor self-protection function
The motor is equipped with an overcurrent protection function. Should the ice
cream reach the pre-set hardness level, the process will automatically cease.
Compressor self-protection function
Once the machine has been switched from ice cream mode or single refrigeration
mode to shutdown mode, a three-minute protection period will commence upon
returning to ice cream mode or single refrigeration mode. However, if the power
cord is unplugged and plugged back in, the machine will restart by default. In this
instance, selecting ice cream mode or single refrigeration mode will not result in
a delay.
Controlling the volume of ingredients
To avoid overflow and waste, make sure that the ingredients do not exceed 60% of
the capacity of the removable bowl (ice cream expands during moulding).
31
Werbung
