Yakima LockNLoad RuggedLine T6 Montageanleitung Seite 4
Inhaltsverzeichnis
PIVOT BRACKET ASSEMBLIES.
5
x6
Retain the 6 mm T-handle
ball end allen key and not yet
x12
6 mm
installed pivot brackets, M8 x 20
mm socket head cap screws,
M8 nyloc nuts and M8 washers.
These components will be
required for mounting your
x6
LockNLoad platform to your
newly installed RuggedLine.
x6
NOW SWITCH TO YOUR LOCKNLOAD PLATFORM
!
INSTRUCTIONS AND CONTINUE FROM THE
'RUGGEDLINE MOUNTING INSTRUCTIONS' PAGE.
9812171_6100017475_Rev5.0
4/20
Inhaltsverzeichnis
