Pictograms And Symbols; General Power Tool Safety Warnings - Parkside Pags 20-Li A1 Originalbetriebsanleitung

Pictograms and symbols

Symbols on the device
The device is part of the
X 20 V TEAM series and can be
operated with batteries of the
X 20 V TEAM series. Batteries of
the X 20 V TEAM series may only
be charged using chargers of the
X 20 V TEAM series.
Attention!
Read the instruction manual
Use hearing protection
Use eye protection
Danger - Keep hands away
from the blade
Attention! Overtravel of the
cutting unit
Use of the device in the rain
or a damp environment is
prohibited.
Beware of ejected parts —
keep bystanders away
Any persons in the vicin-
ity must be kept out of the
danger zone
Guaranteed sound power
level L
WA
in dB.
Ensure objects such as wire,
metallic parts, stones etc. do
not enter the blades while
trimming
Waste electrical and elec-
tronic equipment (WEEE)
must not be disposed of with
domestic waste.
Symbols used in the instruction
manual
Attention!
Use protective gloves
General Power Tool Safety
Warnings
WARNING! Read all safety warn-
ings, instructions, illustrations and
specifications provided with this
power tool. Failure to follow all in-
structions listed below may result in
electric shock, fire and/or serious in-
jury. Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings
refers to your mains-operated (cor-
ded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable li-
quids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
GB MT
29