Operating Instructions; Pad Locking; Trouble Shooting - Tuthill Fill-Rite 700 Serie Eigentümer-, Einbau-, Betriebs- Und Sicherheitsanleitung

Operating Instructions
1) Reset Meter to "0" (if applicable).
2) Remove dispensing nozzle from nozzle boot.
3) Move the switch lever to the "ON" position to
power the pump.
4) Insert the dispensing nozzle into the container to
be filled
5) Operate the nozzle to dispense fluid; release nozzle when the desired amount of fluid
has been dispensed.
6) Move switch lever to the "OFF" position to stop the pump.
7) Remove the dispensing nozzle from the container and store it in the nozzle boot.
CAUTION! Always keep the nozzle in contact with the container being filled
during the filling
up.

Pad Locking

Your Fill-Rite pump nozzle can be pad locked for added security.
With the pump turned off, and the nozzle in the stored position, a
pad lock can be inserted through the locking link and the nozzle
handle opening. This configuration prevents the nozzle from
being removed from the nozzle cover.
Trouble Shooting
The following "Trouble Shooting" guide is provided to offer basic
diagnostic assistance in the event you encounter
service from your Tuthill product.
WARNING! DO NOT open or attempt to repair the motor on your Tuthill pump.
Return it to the place of purchase for service.
compromise the integrity of the Explosion Proof construction and will void any
existing warranty and certification
If you have questions regarding
free to contact our Customer Service Department at 1-800-634-2695 (M-F 8 AM—5 PM ET).
You can also reach us on the World
WARNING!
anv service or maintenance.
process to minimize the possibility of static electricity build
(UL listing).
installing, operating,
Wide Web
Be certain all power to the pump is turned off prior to performing
ON
abnormal
Opening the motor case can
or servicing your product, please feel
at "www.tuthill.com"
9
Tilthill