Tuthill FILL-RITE 700 Serie Eigentümer-, Einbau-, Betriebs- Und Sicherheitsanleitung Seite 6

n 7üthi11
Typical "Island" Installation
Materials:
1-1/4" threaded suction pipe, cut to extend 32-1/2" above the island
TH13 Pedestal Kit (includes 600F2130
Coupler).
Threaded pipe joint sealant appropriate
Installation Procedure:
1) Remove the coupler from
the pedestal pipe by
loosening the set screws.
2) Slip the pedestal pipe /
pump base assembly
the 1-1/4" suction pipe.
3) Loosen the screws
pump base to allow the
pedestal pipe to slide down
exposing the end of the
suction pipe
4) Screw the coupler onto the
suction pipe; seal threads
liquid tight with appropriate
thread sealant.
5) Slide the pedestal pipe into
the coupler and tighten the
set screws.
6) Tighten the screws in the
pump base.
7) Mount the pump on the
coupler seal threads liquid
tight with appropriate
thread sealant.
CAUTION! Threaded pipe joints and connections should be sealed with the
appropriate sealant or sealant tape to minimize the possibility
Pedestal
for application.
RECOMMENDED
over
in the
TANK FLANGE
6
Pipe, 700F3060 Pump Base, &
ISLAND INSTALLATION
2' Sto.
¯Sjl
TAW
MAXIMUM
Gasoline
Diesel
Additional specifications
of leaks.
LIFT
10' (3m)
15' (4.5 m)
on page 15.