Ambu aBox 2 Bedienungsanleitung Seite 9

2.3. Endoscope activation
New endoscope types that are not found on the displaying unit's list of supported endoscopes
(see section 2.2) must be activated with an activation code before they can be used with the
displaying unit. The activation code is entered only once for each endoscope type, and once an
endoscope type has been activated, it can be found on the list of supported visualization devices.
The activation codes are found on Ambu's website via the URL shown on the displaying unit's
screen next to the input field where the activation code is to be entered.
Activate a new endoscope type:
• Press the Settings tab, then press About.
• Scroll to Activation codes
QR code for the activation codes.
• Enter the URL in the address field of the internet browser on your connected device,
e.g. computer, tablet or mobile phone or scan the QR code with your mobile phone.
•
Find the activation code for the endoscope to be activated and enter the code into
the input field below Activation codes
2.4. Description of components
1
2
3
1
3
10
and press the question mark
5
5
6
4 5
2
Wi-Fi
4
11 12 13
6
7 .
6
7
14 15 16 17
to find the URL or
8
18 19
7
9
9