DeWalt DCMCS565 Originalanweisung Seite 29

18V CHAINSAW
DCMCS565
WARNING: Read all safety warnings, instructions,
illustrations, and specifications in this manual,
including the battery and charger sections provided in
an original tool manual or the separate Batteries and
Chargers manual. Manuals can be obtained by contacting
Customer Service (refer to the back page of this manual).
Technical Data
Voltage
Type
Battery type
Bar Length
Maximum Chain Speed (no‑load)
Maximum Cutting Length
Oil Capacity
Weight (without saw chain, guide bar, guide bar cover, oil,
and battery pack)
Noise values and vibration values (triax vector sum) according to EN62841‑4‑1.
L (emission sound pressure level)
PA
K (uncertainty for the emission sound pressure level)
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However, if the tool is
used for different applications, with different accessories or is poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
EC‑Declaration of Conformity
o
Machinery Directive
18V Chainsaw
DCMCS565
DCMCS565
D WALT declares that these products described under
e
V 18 Technical Data are in compliance with:
DC
2006/42/EC, EN62841-1:2015+A11:2022, EN62841-4-1:2020.
1
2000/14/EC, chain saw (category Annex I, item 6), Annex V
Li‑Ion
cm 30
m/s 7.3
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
cm 26
the following address or refer to the back of the manual.
ml 215
The undersigned is responsible for compilation of the technical
kg 2.7
file and makes this declaration on behalf of D
dB(A) 86
dB(A) 3.0
Markus Rompel
dB(A) 95
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
dB(A) 4.9 e
65510, Idstein, Germany
20.10.2024
m/s 2 4.0
m/s 1.5
2
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
L (measured sound power level) 95 dB(A)
WA
L (guaranteed sound power) 100 dB(A)
WA
WARNING: To reduce the risk of injury, read the
instruction manual.
FOR FUTURE REFERENCE
EnGLIsh
WALT at
e
WALT.
e
27