Cutting Height Adjustment; Working Instructions - Fuxtec Fx-Rme38 Bedienungsanleitung

46.

Cutting height adjustment

47.

Working instructions

• Carefully check the entire area to be mown and remove all foreign bodies.
• Only operate the lawn mower if there are no third parties in the danger area.
• Only mow if visibility is good.
• Only operate the machine at walking pace.
• Only operate the mower if the blade is sharp.
• Do not mow over obstacles (e.g. twigs, tree roots).
• On sloping terrain, always mow across the slope. Do not mow uphill or downhill or on slopes where the inclination
exceeds 20°.
• Exercise particular care when changing direction on sloping terrain.
• Before, between and after mowing, check the air inlets that cool the electric motor and remove any blockages. This may
only be done when the engine is switched off, otherwise there is a considerable risk of injury!
Manual_FX-RME38_Int24_rev1
64
To adjust the cutting height, push
the selector lever towards the
mower and then move it to the
desired position and release the
lever into place.