Cleaning The Accessories; Troubleshooting - Silvercrest SEMM 1470 A1 Bedienungsanleitung

Cleaning the accessories

1) Pull the tray for small cups
2) Clean the measuring spoon
small cups
liquid. Rinse all parts afterwards with plenty of clean water.
3) Dry all parts thoroughly, before replacing them in the appliance.
NOTE
► The drip tray
ing in the dishwasher. Make sure that the parts do not get jammed in the
dishwasher.

Troubleshooting

Malfunction
The espresso no longer
flows out
The espresso drips over
the edges of the sieve
holder instead of
from the openings.
The pump is unusually
noisy.
SEMM 1470 A1
forwards out of the appliance to clean it.
, the drip tray
and the drip grille
and the tray for small cups
Cause
• The espresso powder is too
moist and/or compressed too
tightly.
• No water in the water tank
• The holes of the sieve holder
openings are blocked.
• The sieve holder
correctly inserted.
• The sieve holder openings
are blocked.
• There are espresso powder
residues on the edges of the
sieve holder .
• The water tank is empty.
, the extendable tray for
in warm water with a little washing-up
are also suitable for clean-
• Re-prepare the espresso.
However, this time do not
compress it so tightly, or
replace it completely.
• Fill the water tank
.
with water.
• Clean the sieve holder
is not • Insert the sieve holder
correctly.
• Clean the sieve holder
• Clean the espresso
powder residues from
the edges of the sieve
holder
• Fill the water tank
with water.
GB │ IE │ NI
Remedy
.
.
.
│ 27 ■