Preparing Espresso - Silvercrest SEMM 1470 A1 Bedienungsanleitung

Preparing espresso

1) Ensure that there is enough water in the water tank
necessary.
2) Select whether you want a single or double espresso and fit the corresponding
espresso sieve
3) Add the espresso powder to the espresso sieve
holder
4) Pull the tray for small cups
5) Place a suitable cup on the tray for small cups
6) Switch the appliance on using the on/off switch
lamps light up permanently. The appliance has now heated up.
7) Press the "Small" espresso button
The control lamp for the "Small" espresso button
"Double" espresso button
The control lamp for the "Double" espresso button
8) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
9) Wait until the espresso has stopped flowing out of the espresso outlet
all control lamps light up. You can now remove your espresso.
NOTE
► You can stop the preparation at any time by pressing any button.
10) Switch the appliance off using the on/off switch
11) Clean the appliance as described in the section "Cleaning and Care".
NOTE
► If you do not turn off the appliance with the on/off switch
will switch itself into power saving mode automatically after approx. 15
minutes if no other button is pushed. If you want to make another drink,
simply press any button. The appliance heats back up.
SEMM 1470 A1
or in the sieve holder
.
out of the appliance.
. Add more water if
.
and fit the sieve
.
and wait until all control
if you want to prepare a single espresso.
lights up. Press the
if you want to prepare a double espresso.
.
GB │ IE │ NI
lights up.
and
, the appliance
│ 15 ■