Emmaljunga Sento MAX Bedienungsanleitung Seite 50

FLAT
(For FLAT+, see separate description)
1.1 The seat unit is delivered fully
assembled. Only the bumper bar
and the hood need to be assembled.
Insert the bumper bar into the
brackets on both sides of the seat
until you hear a click.
1.2 Fasten the crotch strap around the
bumper bar.
1.3 Insert the hood in both sides of the
seat until you hear a click.
1.4 Secure the back of the hood by
using the 2 hooks. You can click
Emmaljunga's footmuff (accessory)
into place using the eyelets/D-rings
behind the backrest.
WARNING
• Ensure that children are kept away
from all moving parts of the stroller to
avoid risk of injury.
• It is important that the seat unit fabric
is always correctly fitted
• Never use the stroller without making
sure the seat unit fabric is correctly
assembled on the frame first.
• The bumper bar should always be
fitted when using the seat unit.
• Always check that the bumper bar
is correctly attached to the seat unit
before use.
• The hood should always be assembled
when the stroller is in use.
• Never carry the seat unit/stroller by the
bumper bar.
2) Attach/remove the seat unit
2.1 Engage the brake. Click the seat unit
into the chassis, make sure it clicks
in properly and securely on both
sides. The seat unit can be attached
in the direction of travel or against
the direction of travel. Make sure the
indicator is completely green.
2.2 Pull both handles on the sides
upwards and lift the seat unit off the
chassis.
50
• Ensure that children are kept away
• Always check that the seat unit is
• Hold the carrying handles until the seat
• Never leave a child in the seat unit
3) Adjust the hood
ERGO
3.1 Pull the hood gently forward or
3.2. To extend the hood to protect the
3.3 Open the zipper to add more
FLAT
3.1 Pull the hood gently forward or
3.2 Open the zipper to add more
• Ensure that children are kept away
4) Open/close the bumper bar
4.1 Unfasten the crotch strap. Press the
4.2 Press the bumper bar into the bracket
• The bumper bar should always be
• Always check that the bumper bar
• Fasten the crotch strap around the
SENTO MAX Carrycot+, ERGO+, FLAT v. 2.0
WARNING
from all moving parts of the pram to
avoid risk of injury.
securely fixed to the chassis before the
pram is used.
unit is in place.
when removing/attaching the seat unit.
backward to the desired position.
child from weather you can open the
zip on the hood. Pull the hood forward
and the hood extends.
ventilation.
backward to the desired position.
ventilation.
WARNING
from all moving parts of the pram to
avoid risk of injury.
button on the inside of the bumper
bar to open.
until you hear a "click".
WARNING
fitted when using the seat unit.
is correctly attached to the seat unit
before use.