Scheppach PM1800D Originalbetriebsanleitung Seite 26

Check the electrical connection cables for damage
regularly. Make sure that the connection cable does
not hang on the power network during the inspection.
Electrical connection cables must comply with
the applicable VDE and DIN provisions. Only use
connection cables with the marking „H05VV-F".
The printing of the type designation on the connection
cable is mandatory.
Connection type X
If the mains connection cable of this device is
damaged, it must be replaced by a special connection
cable which can be obtained from the manufacturer or
its service department.
AC motor
• The mains voltage must be 220 - 240 V~
• Extension cables up to 25 m long must have a
cross-section of 1.5 mm
Connections and repairs of electrical equipment may
only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Motor data - type plate
13. Storage
Store the device and its accessories in a dark, dry and
frost-proof place that is inaccessible to children. The
optimum storage temperature is between 5 and 30˚C.
Store the electrical tool in its original packaging.
Cover the electrical tool in order to protect it from dust
and moisture.
Store the operating manual with the electrical tool.
14. Disposal and recycling
Notes for packaging
The
recyclable. Please dispose of
packaging in an environmentally
friendly manner.
26 | GB
.
2
packaging materials are
www.scheppach.com
Notes on the electrical and electronic equipment
act [ElektroG]
Waste electrical and electronic equipment
does not belong in household waste, but
must be collected
separately!
• Used batteries or rechargeable batteries that are not
installed permanently in the old appliance must be
removed non-destructively before disposal. Their
disposal is regulated by the battery law.
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
• The end user is responsible for deleting their
personal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
- Public disposal or collection points (e.g. municipal
works yards)
- Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or offer to do so voluntarily.
- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
- Further supplementary take-back conditions
of the manufacturers and distributors can be
obtained from the respective customer service.
• If the manufacturer delivers a new electrical
appliance to a private household, the manufacturer
can arrange for the free collection of the old
electrical appliance upon request from the end user.
Please contact the manufacturer's customer service
for this.
• These statements only apply to devices installed
and sold in the countries of the European Union and
which are subject to the European Directive 2012/19/
EU. In countries outside the European Union,
different regulations may apply to the disposal of
waste electrical and electronic equipment.
and disposed of