Scheppach PM1800D Originalbetriebsanleitung Seite 20

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that
occurs due to the non-compliance of the electric
regulations and VDE regulations 0100, DIN 57113
/ VDE0113.
We recommend:
Read through the complete text in the operating
instructions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accordance
with the recommendations.
The operating instructions
information on how to operate the machine safely,
professionally and economically, how to avoid danger,
costly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable
regulations that apply for the operation of the machine
in your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
20 | GB
contain important
www.scheppach.com
The machine can only be operated by persons who were
instructed concerning the operation of the machine and
who are informed about the associated dangers. The
minimum age requirement must be complied with.
In addition to the safety notices contained in this
operating manual and the particular instructions for
your country, the generally recognised technical
regulations for the operation of identical devices must
be complied with.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (fig. 1)
1. Hand-Mixer
2. Mortar beater - R
3. Mortar beater - L
4. ON / OFF-switch
5. Trip switch
6. Speed control
7. 2-speed switch
8. Handle
9. Holder - R
10. Holder - L
11. Sleeve - R
12. Sleeve - L
3. Scope of delivery
Item Quantity Designation
2 /3 2x Mortar beater
1 1x Hand-Mixer
2x Replacement carbon brushes
1x Operating manual
4. Proper use
This machine is designed to mix liquid and powdery
materials such as paint, mortar, adhesive, plaster
and similar substances evenly and homogeneously.
Depending on the material consistency and mixing
quantity, the appropriate stirrer with the appropriate
mixing effect should be used.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.