Extech EX810 Bedienungsanleitung Seite 14

Maintenance
WARNING: To avoid electrical shock, disconnect the meter from any circuit, remove the
test leads from the input terminals, and turn OFF the meter before opening the case. Do not
operate the meter with an open case.
Cleaning and Storage
Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or
solvents. If the meter is not to be used for 60 days or more, remove the battery and store it
separately.
Battery Replacement
Remove the Phillips head screw that secures the rear battery door
2. Open the battery compartment
3. Replace the 9V battery
Secure the battery compartment
4.
You, as the end user, are legally bound (Battery ordinance) to retum all used
batteries and accumulators; disposal in the household
You can hand over your used batteries / accumulators, gratuitously, at the
collection points for our branches in your community or wherever batteries /
accumulators are sold!
Disposal
Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
UL Note
A UL mark does not indicate that this product has been evaluated for accuracy.
Copyright 0 2005 Extech Instruments
All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
garbage is prohibited!
Corporation
12 EX810-830-EU_ENG V3.o 4/05
Manuel d'utilisation
EXTECH
INSTRUMENTS
Pinces Amperemétriques
Amperes avec Thermometre
InfraRouge
Modéle EX810 Pince Amperemétrique
Modéle EX830 Pince Ampéremétrique
Efficaces Vraies —True RMS)
O)20
1000
AC
AC/DC (Mesures
o