Auto Steam Programs - Panasonic HL-SX485S Bedienungs- Und Installationsanleitung

Auto Steam Programs

This feature allows you to steam some of your favourite foods by setting the weight
only. The oven determines the steam level and the cooking time automatically. Select the
category and set the weight of the food. For quick selection, the weight starts from the
most commonly used weight for each category.
Select the desired
auto steam program.
NOTE
„ The auto steam programs must ONLY be used for foods described.
„ Only cook foods within the weight ranges described.
„ Always weigh the food rather than relying on the package weight information.
„ Only use the accessories as indicated on pages 45-48.
„ Do not cover foods on the auto steam programs.
„ Most foods benefit from a STANDING time after cooking on an auto program,
to allow heat to continue conducting to the centre.
„ To allow for some variations that occur in food, check that food is thoroughly
cooked and piping hot before serving.
„ Wipe away excess water in the cavity and around the water tanks after cooking
with steam.
Program
32. CARROTS
(FRESH)
33. BROCCOLI
/ CAULIFLOWER
(FRESH)
Select the cooking weight by tapping
the up and down keys.
Weight Accessories
kg
0.20 -
kg
0.32
kg
0.20 -
kg
0.32
Touch Stop/Start.
The cooking program
will start and the time
in the display will
count down.
Instructions
To steam FRESH carrots. Fill water
tank. Place prepared carrots onto
plastic trivet. Place plastic trivet on
glass shelf in shelf position 3. Select
auto steam program 32. Enter the
weight of the fresh carrots. Touch
Stop/Start.
To steam FRESH broccoli or
cauliflower. Fill water tank. Place
prepared broccoli or cauliflower
onto plastic trivet. Place plastic trivet
on glass shelf in shelf position 3.
Select auto steam program 33. Enter
the weight of the fresh broccoli or
cauliflower. Touch Stop/Start.
45
EN