Installing The Appliance; Electrical Connection - Panasonic HL-SX485S Bedienungs- Und Installationsanleitung

Installing the Appliance

Electrical connection

• Before connection, check that the mains voltage corresponds to that indicated on
the rating label fixed to the inside of the appliance. This data must correspond in
order to avoid the risk of damage to the appliance.
• Check that the domestic power supply guarantees adequate earthing.
• Once installed, it should be easy to isolate the appliance from the electricity
supply by pulling out the plug or operating a circuit breaker.
• The appliance must only be connected with the power cable provided.
• DO NOT use multi-plug adaptors power strips or extension leads. There is a risk
of fire in the event of overloading.
61
EN