Werbung
27. DEVICE CALIBRATION
• Go to "Settings".
• Select "Device leveling calibration" from the
1
menu.
• Click "OK" to confirm the calibration.
NOTES:
• You should calibrate the vacuum cleaner if it behaves in
a non-standard way (e.g.: choppy non-smooth movement, etc.).
• When calibrating, the vacuum cleaner must be placed on a flat surface
(away from the charging station).
28. NAME OF THE VACUUM CLEANER
• Go to "Settings".
• Select "Robot name" from the menu.
1
• You can then enter your own name for the
vacuum cleaner.
• Click "OK" to confirm the change.
29. RESET TO FACTORY SETTINGS
• Go to "Settings".
1
• Select "Factory Reset" from the menu.
• Click "OK" to confirm the reset.
ATTENTION:
• Resetting to factory defaults loses any settings you have made
(maps, cleaning history, etc.), so always consider whether this step is
necessary.
EN
EN - 51
Werbung
