Werbung
7. ROOM CLEAN-UP
1
• On the main screen, click on „Customize".
• Then click on the desired room.
• You can now set how you want to clean the
room.
• In the section "Cleaning times", you can set
how many times the vacuum cleaner runs
through the room ("x1" = "Only once", "x2"
= "Twice").
2
• In the „suction" section you can set
the suction intensity (4 levels: "Quiet";
"Standard"; "Medium"; "Turbo").
• To save the settings, click on the "Tick"
symbol in the upper right corner.
• Apply the same procedure to all rooms in
the map.
3
• The settings for each room are displayed
on the map under the room name.
• To start cleaning the selected rooms, first
click on "Adjust" on the main screen.
• Select the "Customize" option at the top.
4
• Click to select the rooms you want to clean.
• Then start cleaning by clicking on "Start
clean".
• The vacuum cleaner cleans the selected
rooms according to the settings.
5
• After cleaning, the vacuum cleaner
automatically returns to the charging
station.
REMARKS:
• Before using the cleaning mode, at first, it is necessary to create
a map.
• One room or several rooms may be cleaned up within one cleaning.
8. AREA CLEANING
• On the main screen, select "Normal" and
click on the "Zone Cleaning" icon.
• A zone will appear on the map (only 1
zone can be inserted).
1
• You may freely shift a zone in the map and
change its size.
• You can cancel a zone by clicking on
the "Cross" or by clicking on the "Zone
Cleaning" icon again.
2
• Click on „Start clean" to start cleaning.
• Having finished the cleaning, the vacuum
3
cleaner returns automatically to the
charging station.
EN
EN - 43
Werbung
