Werbung
24. VOICE ALERT, SOUND AND VOLUME
• Go to "Settings".
• After that, select „Voice (broadcast)
1
settings" in menu.
• You can now adjust the settings.
25. DO NOT DISTURB MODE
• Go to "Settings".
• After that, select „DND" in menu.
• Now you can set the time range for that
1
mode.
• To activate this mode, use a switch in the
right upper corner.
REMARKS:
• If "DND" is active, the voice alerts will be turned off within the set
time period.
26. MONITORING OF SERVICE LIFE OF COMPONENTS
• Go to "Settings".
• After that, select „Consumables statistics"
in menu.
1
• You may here easily obtain information on
the service life of particular components
of the vacuum cleaner (main brush, side
brushes, filter, mop).
• After the replacement of one of the
components, it is necessary to reset it to
start the deduction of percents from 100%.
2
• To do it, click on the corresponding
component first.
• Then click on "Reset".
• Then, click on „OK" to confirm the reset.
REMARKS:
• The lifetime of each component is counted down gradually and is
given in % and hours (how much lifetime is left).
• After the lapse of the service life of a component, we recommend
that you replace this component to keep in the best way efficiency of
suction and to prevent the vacuum cleaner from possible damage.
EN
EN - 50
Werbung
