Werbung
Room segmentation
• Click to select the room you want to split.
• Then click on "segmentation".
• In the selected room, draw a line with your
4
finger in the way you want to divide the
room.
• Then confirm the division by clicking on the
"Tick" symbol in the bottom right corner. This
will divide the room into 2 parts.
Room name
• Click to select the room you want to change
the name of.
• You can select one of the predefined names
5
from the menu or click on "Custom" to enter
any name.
• Confirm the change by clicking on "OK" or,
if you have selected a predefined name, by
clicking on the "Tick" symbol in the upper
right corner.
Virtual wall / restricted zone
• Go to "Settings" and select "Virtual Wall /
restricted area".
• Click on "Add virtual wall" to add a virtual
wall to the map.
• Click on "No-go Zone" to insert a restricted
6
zone into the map where the vacuum
cleaner will never move.
• Click on "No-mop Zone" to insert a zone
in the map where the vacuum cleaner will
not move if it has a mopping attachment
installed.
• To save your edits, click on the "Tick" symbol
in the upper right corner of the.
REMARKS:
• In total, it is possible to insert up to 7+7 different restricted areas and
10 virtual walls.
6. AUTOMATIC CLEANING
• On the main screen, click on „Normal".
• Then click on "Start clean".
1
• The vacuum cleaner will clean up
systematically all the rooms in the map to
which an access is enabled.
• Having finished the cleaning, the vacuum
2
cleaner returns automatically to the
charging station.
REMARKS:
• It is one of the most usable cleaning modes, when the vacuum
cleaner cleans up the whole available area.
EN
EN - 42
Werbung
