EN
ation. Particular attention should be paid to the connectors
between the accessories and the base to which they are fitted
(e.g. bowl and base). If electrical components are flooded, they
must be thoroughly cleaned and dried before using the appli-
ance again.
CAUTION! Hot surface! The symbol placed on the ap-
pliance indicates that its components may become hot
during operation.
- Caution! Risk of burns - during operation, accessories for the
thermal treatment of food (e.g. bowl) may become hot and
retain a high temperature after the appliance is switched off -
be careful, only touch the parts intended for this purpose, e.g.
handle, knob, buttons, etc. If necessary, use kitchen gloves, etc.
CAUTION! Danger of being burnt by steam - the symbol
indicates that hot steam may be ejected during operation
of the appliance.
- Be careful when pouring hot liquid into the bowl/blender, as it
can be splashed outwards through rapid evaporation.
- Be careful when preparing food at high temperatures. When a
bowl or other lockable attachment is opened, hot fumes may be
expelled or the contents may be ejected.
- The temperature of the appliance's surfaces may be higher during
operation.
- Place foodstuffs only with the dedicated pusher - do not put your
hand into the chamber of the running appliance, do not place
foodstuffs in the appliance using accessories not intended for this
purpose e.g. forks, spoons etc. - this applies to accessories fitted
with a pusher, e.g. for shredding, mincing meat, squeezing juice, etc.
- CAUTION! Avoid physical contact with the cutting blades while
emptying and cleaning the device as they are very sharp and
might cause serious injures.
- Clean the device, in particular parts being in direct contact with
food, before first use, immediately after finishing work and if
the device has not been used for a long time. The procedure is
described in details in the "CLEANING AND MAINTENANCE"
section.
30